Servo

From NaWiki

Jump to: navigation, search

Description

Connecting servos to DSerial is very easy. This project uses pins P0.7, P1.2, P1.3, P1.4 and P1.5 for five servos. It's possible to connect more servos with a few modifications.

See hacking servo for information about modifying a servo for continuous rotation.

Pictures

Here is an overview of the system. A 5V source is needed for the servos, since DS only supplies 3.3V. I used a 11.1V Li-poly battery and a 5V regulator.

DSerial connected to a servo

Servo connector is soldered to IO1 port.

DSerial with servo connector
DSerial servo connector
DSerial servo connector connected to one servo

Files

dserial-1.1-alpha.zip DSerial servo code

Retrieved from "http://natrium42.com/wiki/Servo"
Personal tools